2021 |
|
367. | Ashish Kumar Singh; Kyung-Bin Bae; Seong-Ook Park NLFM pulse radar for drone detection using predistortion technique Journal Article Journal of Electromagnetic Waves and Applications, 35 (3), pp. 416 - 429, 2021. Abstract | Links | BibTeX | 태그: International @article{Singh2021, title = {NLFM pulse radar for drone detection using predistortion technique}, author = {Ashish Kumar Singh and Kyung-Bin Bae and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2021/03/NLFM-pulse-radar-for-drone-detection-using-predistortion-technique-3.pdf}, doi = {10.1080/09205071.2020.1844598}, year = {2021}, date = {2021-02-11}, journal = {Journal of Electromagnetic Waves and Applications}, volume = {35}, number = {3}, pages = {416 - 429}, abstract = {The development of radar technology for the detection of small drones is getting attention of researchers. In this work, the detection of drones using Ku-band radar system has been discussed. We have utilized the advantage of nonlinear frequency modulation (NLFM) waveform for the suppression of range sidelobes. The performance and sensitivity of a radar system can be related with the linearity of system response. Here, we have made an effort to minimize non-linearity in the radar system response by using digital predistortion method. In this method, amplitude weighting coefficients have been calculated based on the received data. We have used FPGA-based transceiver for intermediate frequency (IF) signal generation and data acquisition, along with Ku-band up-down converters. The radar system was first calibrated for desired frequency band using amplitude predistortion method. In this article, experiment results for the detection of single drone and two drones using NLFM pulse signal are presented.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } The development of radar technology for the detection of small drones is getting attention of researchers. In this work, the detection of drones using Ku-band radar system has been discussed. We have utilized the advantage of nonlinear frequency modulation (NLFM) waveform for the suppression of range sidelobes. The performance and sensitivity of a radar system can be related with the linearity of system response. Here, we have made an effort to minimize non-linearity in the radar system response by using digital predistortion method. In this method, amplitude weighting coefficients have been calculated based on the received data. We have used FPGA-based transceiver for intermediate frequency (IF) signal generation and data acquisition, along with Ku-band up-down converters. The radar system was first calibrated for desired frequency band using amplitude predistortion method. In this article, experiment results for the detection of single drone and two drones using NLFM pulse signal are presented. |
366. | Junhyeong Park; Dae-Hwan Jung; Seong-Ook Park Strategic method of determining parameter values in frequency modulated continuous wave radar for low noise floor over middle‐long range Journal Article Microwave and Optical Technology Letters, 2021. Abstract | Links | BibTeX | 태그: International @article{Park2021b, title = {Strategic method of determining parameter values in frequency modulated continuous wave radar for low noise floor over middle‐long range}, author = {Junhyeong Park and Dae-Hwan Jung and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2021/03/mop.32805.pdf}, doi = {10.1002/mop.32805}, year = {2021}, date = {2021-02-03}, journal = {Microwave and Optical Technology Letters}, abstract = {Heterodyne architecture has been frequently chosen to resolve the problem of dc offset in frequency modulated continuous wave (FMCW) radar. However, heterodyne FMCW radars use different local oscillators, resulting in uncorrelated phase noise (UPN) in beat signals. Therefore, the inherent leakage signal in the heterodyne FMCW radar also has UPN and raises the noise floor in the power spectrum. In this letter, we propose a strategic decision method for parameter values in the heterodyne FMCW radar to achieve a low noise floor over the middle‐long range. In addition, we experimentally discover the relation between the UPN and the processing gain for the first time. Based on this relation, we devise an exact formula for the degree of improvement achieved due to the proposed strategic decision method. Experimental results confirm the devised formula and show that the proposed method significantly reduces the noise floor over the middle‐long range.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } Heterodyne architecture has been frequently chosen to resolve the problem of dc offset in frequency modulated continuous wave (FMCW) radar. However, heterodyne FMCW radars use different local oscillators, resulting in uncorrelated phase noise (UPN) in beat signals. Therefore, the inherent leakage signal in the heterodyne FMCW radar also has UPN and raises the noise floor in the power spectrum. In this letter, we propose a strategic decision method for parameter values in the heterodyne FMCW radar to achieve a low noise floor over the middle‐long range. In addition, we experimentally discover the relation between the UPN and the processing gain for the first time. Based on this relation, we devise an exact formula for the degree of improvement achieved due to the proposed strategic decision method. Experimental results confirm the devised formula and show that the proposed method significantly reduces the noise floor over the middle‐long range. |
365. | Junhyeong Park; Jun-Sung Park; Kyung-Bin Bae; Seong-Ook Park Advanced stationary point concentration technique for leakage mitigation and small drone detection with FMCW radar Journal Article IEEE Transactions on Microwave Theory and Techniques, 69 (3), pp. 1791 - 1804, 2021. Abstract | Links | BibTeX | 태그: International @article{Park2021, title = {Advanced stationary point concentration technique for leakage mitigation and small drone detection with FMCW radar}, author = {Junhyeong Park and Jun-Sung Park and Kyung-Bin Bae and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2021/03/09339993-4.pdfhttp://ma.kaist.ac.kr/wp-content/uploads/2021/03/09339993-5.pdf}, doi = {10.1109/TMTT.2021.3052190}, year = {2021}, date = {2021-01-28}, journal = {IEEE Transactions on Microwave Theory and Techniques}, volume = {69}, number = {3}, pages = {1791 - 1804}, abstract = {With the increase in threats posed by small drones, the development of radars to detect such drones has become a key necessity. In earlier studies, we proposed the stationary point concentration (SPC) technique for small drone detection using frequency-modulated continuous-wave (FMCW) radar. The SPC technique is a novel approach for mitigating leakage, which is an inherent problem in FMCW radar. The SPC technique improves the signal-to-noise ratio of small drones by reducing the noise floor and provides accurate distance and velocity information of such drones. However, this technique has shortcomings in its realization. In this article, we present the drawbacks of this technique and propose an advanced SPC (A-SPC) technique. The proposed technique can overcome the drawbacks of the SPC technique while implementing the benefits of the SPC technique. The experimental results verify the proposed A-SPC technique and demonstrate its robustness and usefulness.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } With the increase in threats posed by small drones, the development of radars to detect such drones has become a key necessity. In earlier studies, we proposed the stationary point concentration (SPC) technique for small drone detection using frequency-modulated continuous-wave (FMCW) radar. The SPC technique is a novel approach for mitigating leakage, which is an inherent problem in FMCW radar. The SPC technique improves the signal-to-noise ratio of small drones by reducing the noise floor and provides accurate distance and velocity information of such drones. However, this technique has shortcomings in its realization. In this article, we present the drawbacks of this technique and propose an advanced SPC (A-SPC) technique. The proposed technique can overcome the drawbacks of the SPC technique while implementing the benefits of the SPC technique. The experimental results verify the proposed A-SPC technique and demonstrate its robustness and usefulness. |
364. | Junhyeong Park; Seong-Ook Park Improved Drone Detection in FMCW Radar using SPC Technique Conference 2020 International Symposium on Antennas and Propagation (ISAP), Japan, 2021. BibTeX | 태그: International @conference{Park2021e, title = {Improved Drone Detection in FMCW Radar using SPC Technique}, author = {Junhyeong Park and Seong-Ook Park}, year = {2021}, date = {2021-01-25}, booktitle = {2020 International Symposium on Antennas and Propagation (ISAP)}, address = {Japan}, keywords = {International}, pubstate = {published}, tppubtype = {conference} } |
2020 |
|
363. | Hyun-Seong Kang; Seong-Ook Park 합성곱 신경망을 이용한 향상된 드론의 고도각 식별을 위한 다중 편파 미세 도플러 정보 분석 Conference 2020년 한국전자파학회 추계학술대회, 2020. @conference{Kang2020d, title = {합성곱 신경망을 이용한 향상된 드론의 고도각 식별을 위한 다중 편파 미세 도플러 정보 분석}, author = {Hyun-Seong Kang and Seong-Ook Park}, year = {2020}, date = {2020-11-19}, booktitle = {2020년 한국전자파학회 추계학술대회}, journal = {2020년 한국전자파학회 추계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
362. | Hyun-Seong Kang; Byung Kwan Kim; Jun-Sung Park; Jun-Seuk Suh; Seong-Ook Park Drone Elevation Angle Classification Based on Convolutional Neural Network With Micro-Doppler of Multipolarization Journal Article IEEE Geoscience and Remote Sensing Letters, 2020. Abstract | Links | BibTeX | 태그: International @article{Kang2020c, title = {Drone Elevation Angle Classification Based on Convolutional Neural Network With Micro-Doppler of Multipolarization}, author = {Hyun-Seong Kang and Byung Kwan Kim and Jun-Sung Park and Jun-Seuk Suh and Seong-Ook Park}, doi = {10.1109/LGRS.2020.3030113}, year = {2020}, date = {2020-11-02}, journal = {IEEE Geoscience and Remote Sensing Letters}, abstract = {Multipolarizations of micro-Doppler signature (MDS) were combined to classify the elevation angle of a drone by a convolutional neural network (CNN). We classified the drone's elevation angle based on the MDS, which depends on the elevation angle of the drone. To enhance the classification accuracy, we utilized micro-Doppler from multiple polarized radar signals. We utilized and analyzed four different polarizations for the receiver, namely, vertical/horizontal/right-handed circular polarization (RHCP)/left-handed circular polarization (LHCP), while the polarization for the transmitter was vertical. The four receivers with different polarizations were fully synchronized with Tx for accurate MDS measurement for each polarization. The radar data received from the multiple polarizations were combined for the classification algorithm based on CNN. The classification rate of the elevation angles of a drone was improved from 84.745% to 97.9% compared to a single polarization by using multiple polarizations.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } Multipolarizations of micro-Doppler signature (MDS) were combined to classify the elevation angle of a drone by a convolutional neural network (CNN). We classified the drone's elevation angle based on the MDS, which depends on the elevation angle of the drone. To enhance the classification accuracy, we utilized micro-Doppler from multiple polarized radar signals. We utilized and analyzed four different polarizations for the receiver, namely, vertical/horizontal/right-handed circular polarization (RHCP)/left-handed circular polarization (LHCP), while the polarization for the transmitter was vertical. The four receivers with different polarizations were fully synchronized with Tx for accurate MDS measurement for each polarization. The radar data received from the multiple polarizations were combined for the classification algorithm based on CNN. The classification rate of the elevation angles of a drone was improved from 84.745% to 97.9% compared to a single polarization by using multiple polarizations. |
361. | Tae-Wan Kim; Jinki Park; Seong-Ook Park Theoretical Model for Resonant Frequency of Rectangular Microstrip Patch Antenna on Liquid Crystal Substrate Conference 2020년 한국전자파학회 하계종합학술대회, 2020. @conference{Kim2020, title = {Theoretical Model for Resonant Frequency of Rectangular Microstrip Patch Antenna on Liquid Crystal Substrate}, author = {Tae-Wan Kim and Jinki Park and Seong-Ook Park}, year = {2020}, date = {2020-08-19}, booktitle = {2020년 한국전자파학회 하계종합학술대회}, journal = {2020년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
360. | Dong-Ha Yang; Seong-Ook Park Gain Improvement with Meta-Surface(MS) Lens for Dual-Polarized Horn Antenna using Tangential Phase Compensation Technique Conference 2020년 한국전자파학회 하계종합학술대회, 2020. @conference{Yang2020, title = {Gain Improvement with Meta-Surface(MS) Lens for Dual-Polarized Horn Antenna using Tangential Phase Compensation Technique}, author = {Dong-Ha Yang and Seong-Ook Park}, year = {2020}, date = {2020-08-19}, booktitle = {2020년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
359. | Young-Geun Kang; Han-Sol Kim; Chul-Ki Kim; Seong-Ook Park 위성 고도계의 Burst 펄스 전송 기법을 활용한 고주파 SAR 알고리즘 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. @conference{Kang2020, title = {위성 고도계의 Burst 펄스 전송 기법을 활용한 고주파 SAR 알고리즘}, author = {Young-Geun Kang and Han-Sol Kim and Chul-Ki Kim and Seong-Ook Park}, year = {2020}, date = {2020-08-19}, booktitle = {2020년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
358. | Chul-Ki Kim; Seong-Ook Park 광각안테나(Wide-Angle Antenna)를 이용한 Video-SAR Frame 추출법 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. @conference{Kim2020b, title = {광각안테나(Wide-Angle Antenna)를 이용한 Video-SAR Frame 추출법}, author = {Chul-Ki Kim and Seong-Ook Park}, year = {2020}, date = {2020-08-19}, booktitle = {2020년 한국전자파학회 하계종합학술대회}, journal = {2020년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
357. | Jinki Park; Seong-Ook Park Liquid Crystal 원통형 공진기의 밀리미터파 공진 주파수 계산 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. @conference{Park2020, title = {Liquid Crystal 원통형 공진기의 밀리미터파 공진 주파수 계산}, author = {Jinki Park and Seong-Ook Park}, year = {2020}, date = {2020-08-19}, booktitle = {2020년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
356. | Ye-eun Chi; Dong-Chan Kim; Seong-Ook Park Quadrature mixer 을 이용한 밀리미터파 대역 다중 시스템 간의 위상 제어 시스템 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. @conference{Chi2020, title = {Quadrature mixer 을 이용한 밀리미터파 대역 다중 시스템 간의 위상 제어 시스템}, author = {Ye-eun Chi and Dong-Chan Kim and Seong-Ook Park}, year = {2020}, date = {2020-08-19}, booktitle = {2020년 한국전자파학회 하계종합학술대회}, journal = {2019년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
355. | Chul-Ki Kim; Seong-Ook Park 초소형 위성용 합성개구레이더(SAR) 탑재체 기술소개 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. @conference{Kim2020c, title = {초소형 위성용 합성개구레이더(SAR) 탑재체 기술소개}, author = {Chul-Ki Kim and Seong-Ook Park}, year = {2020}, date = {2020-08-19}, booktitle = {2020년 한국전자파학회 하계종합학술대회}, journal = {2020년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
354. | Kyung-Bin Bae; Ye-eun Chi; Jun-Sung Park; Seong-Ook Park Chirp Pulse 레이다에 적용 가능한 Micro-Doppler Signature 추출 기법 및 이를 이용한 소형 드론 탐지 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. @conference{Bae2020, title = {Chirp Pulse 레이다에 적용 가능한 Micro-Doppler Signature 추출 기법 및 이를 이용한 소형 드론 탐지}, author = {Kyung-Bin Bae and Ye-eun Chi and Jun-Sung Park and Seong-Ook Park}, year = {2020}, date = {2020-08-19}, booktitle = {2020년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
353. | Jun-Sung Park; Junhyeong Park; Seong-Ook Park 저잡음 레이다 시스템 설계 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. @conference{Park2020b, title = {저잡음 레이다 시스템 설계}, author = {Jun-Sung Park and Junhyeong Park and Seong-Ook Park}, year = {2020}, date = {2020-08-19}, booktitle = {2020년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
352. | Byung Kwan Kim; Hyun-Seong Kang; Seongwook Lee; Seong-Ook Park Improved Drone Classification Using Polarimetric Merged-Doppler Images Journal Article IEEE Geoscience and Remote Sensing Letters, 2020. Abstract | Links | BibTeX | 태그: International @article{Kim2020f, title = {Improved Drone Classification Using Polarimetric Merged-Doppler Images}, author = {Byung Kwan Kim and Hyun-Seong Kang and Seongwook Lee and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2021/03/09158523.pdf}, doi = {10.1109/LGRS.2020.3011114}, year = {2020}, date = {2020-08-04}, journal = {IEEE Geoscience and Remote Sensing Letters}, abstract = {We propose a drone classification method for polarimetric radar, based on convolutional neural network (CNN) and image processing methods. The proposed method improves drone classification accuracy when the micro-Doppler signature is very weak by the aspect angle. To utilize received polarimetric signal, we propose a novel image structure for three-channel image classification CNN. To reduce the size of data from four different polarization while securing high classification accuracy, an image processing method and structure are introduced. The data set is prepared for a three type of drone, with a polarimetric Ku-band frequency modulated continuous wave (FMCW) radar system. Proposed method is tested and verified in an anechoic chamber environment for fast evaluation. A famous CNN structure, GoogLeNet, is used to evaluate the effect of the proposed radar preprocessing. The result showed that the proposed method improved the accuracy from 89.9% to 99.8%, compared with single polarized micro-Doppler image. We compared the result from the proposed method with conventional polarimetric radar image structure and achieved similar accuracy while having half of full polarimetric data.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } We propose a drone classification method for polarimetric radar, based on convolutional neural network (CNN) and image processing methods. The proposed method improves drone classification accuracy when the micro-Doppler signature is very weak by the aspect angle. To utilize received polarimetric signal, we propose a novel image structure for three-channel image classification CNN. To reduce the size of data from four different polarization while securing high classification accuracy, an image processing method and structure are introduced. The data set is prepared for a three type of drone, with a polarimetric Ku-band frequency modulated continuous wave (FMCW) radar system. Proposed method is tested and verified in an anechoic chamber environment for fast evaluation. A famous CNN structure, GoogLeNet, is used to evaluate the effect of the proposed radar preprocessing. The result showed that the proposed method improved the accuracy from 89.9% to 99.8%, compared with single polarized micro-Doppler image. We compared the result from the proposed method with conventional polarimetric radar image structure and achieved similar accuracy while having half of full polarimetric data. |
351. | Hyunseong Kang; Kyung-Bin Bae; Myung-Hun Jeong; Seong-Ook Park Measurement and Analysis of Radiation Leakage From a GPS Module for the Detection of Drones Journal Article IEEE Antennas and Wireless Propagation Letters, 19 (9), pp. 1610 - 1614, 2020. Abstract | Links | BibTeX | 태그: International @article{Kang2020b, title = {Measurement and Analysis of Radiation Leakage From a GPS Module for the Detection of Drones}, author = {Hyunseong Kang and Kyung-Bin Bae and Myung-Hun Jeong and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2020/09/Measurement-and-Analysis-of-Radiation-Leakage-From-a-GPS-Module-for-the-Detection-of-Drones.pdf}, doi = {10.1109/LAWP.2020.3011851}, year = {2020}, date = {2020-07-24}, journal = {IEEE Antennas and Wireless Propagation Letters}, volume = {19}, number = {9}, pages = {1610 - 1614}, abstract = {Radiation leakage of a global positioning system (GPS) module was investigated for a drone detection system by measuring the attenuation effect and long-range detection on the outside of a building. The GPS module consisting of the radio frequency components is essential to control the flight of a drone. There is an unavoidable leakage in the GPS module during operation, and the leakage signal from the GPS module was analyzed and detected with a high-sensitivity receiver. To analyze the leakage from the GPS module during operation, we obtained the whole frequencies of leakage signals and the radiation pattern of a drone with the GPS module in an anechoic chamber. From the data, we measured the leakage signals in an outdoor space. Through outdoor measurement, it was confirmed that the theoretical attenuation effect was consistent with the measured value with a distance variation. Finally, the GPS leakage in the drone was measured up to 950 m with a high signal-to-noise ratio (SNR) of 25 dB.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } Radiation leakage of a global positioning system (GPS) module was investigated for a drone detection system by measuring the attenuation effect and long-range detection on the outside of a building. The GPS module consisting of the radio frequency components is essential to control the flight of a drone. There is an unavoidable leakage in the GPS module during operation, and the leakage signal from the GPS module was analyzed and detected with a high-sensitivity receiver. To analyze the leakage from the GPS module during operation, we obtained the whole frequencies of leakage signals and the radiation pattern of a drone with the GPS module in an anechoic chamber. From the data, we measured the leakage signals in an outdoor space. Through outdoor measurement, it was confirmed that the theoretical attenuation effect was consistent with the measured value with a distance variation. Finally, the GPS leakage in the drone was measured up to 950 m with a high signal-to-noise ratio (SNR) of 25 dB. |
350. | Dae-Hwan Jung; Do-Hoon Kim; Muhammad Tayyab Azim; Junhyeong Park; Seong-Ook Park A Novel Signal Processing Technique for Ku-Band Automobile FMCW Fully Polarimetric SAR System Using Triangular LFM Journal Article IEEE Transactions on Instrumentation and Measurement, 2020. Abstract | Links | BibTeX | 태그: International @article{Jung2020, title = {A Novel Signal Processing Technique for Ku-Band Automobile FMCW Fully Polarimetric SAR System Using Triangular LFM}, author = {Dae-Hwan Jung and Do-Hoon Kim and Muhammad Tayyab Azim and Junhyeong Park and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2021/03/09146876-2.pdf}, doi = {https://doi.org/10.1109/TIM.2020.3011601}, year = {2020}, date = {2020-07-24}, journal = {IEEE Transactions on Instrumentation and Measurement}, abstract = {This article presents a novel signal technique for Ku-band automobile frequency-modulated continuous-wave fully polarimetric synthetic aperture radar (FMCW PolSAR) system using triangular linear frequency modulation (LFM). Our proposed system shows the first utilizations of triangular LFM for an FMCW PolSAR. The proposed signal processing algorithm is based on the range Doppler algorithm (RDA). We developed an FMCW PolSAR system that transmits triangular LFM signals, which are used less frequently than sawtooth LFM in an SAR sensor. Using a theoretical background, we describe its configuration and how it works. We propose the novel processing solution, which forms two kinds of single-polarization images from a raw data set and is suitable for our system. We obtained all four kinds of single-polarization images from two raw data sets while using the triangular LFM. In comparison, when using sawtooth LFM, we obtained the four images from four raw data sets by repeating the RDA four times. The proposed method simplifies the FMCW PolSAR system configuration and the processing algorithm. We collected FMCW PolSAR raw data from an experimentally equipped automobile while maintaining a constant speed on a highway. The proposed algorithm and system were validated by processing a high-resolution FMCW PolSAR image.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } This article presents a novel signal technique for Ku-band automobile frequency-modulated continuous-wave fully polarimetric synthetic aperture radar (FMCW PolSAR) system using triangular linear frequency modulation (LFM). Our proposed system shows the first utilizations of triangular LFM for an FMCW PolSAR. The proposed signal processing algorithm is based on the range Doppler algorithm (RDA). We developed an FMCW PolSAR system that transmits triangular LFM signals, which are used less frequently than sawtooth LFM in an SAR sensor. Using a theoretical background, we describe its configuration and how it works. We propose the novel processing solution, which forms two kinds of single-polarization images from a raw data set and is suitable for our system. We obtained all four kinds of single-polarization images from two raw data sets while using the triangular LFM. In comparison, when using sawtooth LFM, we obtained the four images from four raw data sets by repeating the RDA four times. The proposed method simplifies the FMCW PolSAR system configuration and the processing algorithm. We collected FMCW PolSAR raw data from an experimentally equipped automobile while maintaining a constant speed on a highway. The proposed algorithm and system were validated by processing a high-resolution FMCW PolSAR image. |
349. | Chul-Ki Kim; Muhammad Tayyab Azim; Ashish Kumar Singh; Seong-Ook Park Doppler Shifting Technique for Generating Multi-Frames of Video SAR via Sub-Aperture Signal Processing Journal Article IEEE Transactions on Signal Processing, 68 , pp. 3990 - 4001, 2020. Abstract | Links | BibTeX | 태그: International @article{Kim2020e, title = {Doppler Shifting Technique for Generating Multi-Frames of Video SAR via Sub-Aperture Signal Processing}, author = {Chul-Ki Kim and Muhammad Tayyab Azim and Ashish Kumar Singh and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2020/09/Doppler-Shifting-Technique-for-Generating-Multi-Frames-of-Video-SAR-via-Sub-Aperture-Signal-Processing.pdf}, doi = {10.1109/TSP.2020.3006749}, year = {2020}, date = {2020-07-02}, journal = {IEEE Transactions on Signal Processing}, volume = {68}, pages = {3990 - 4001}, abstract = {The signal processing technologies of synthetic aperture radar (SAR) have been vastly studied as diverse measurement modes for various applications. One of the technologies is Video-SAR (ViSAR). It is a land-imaging mode where a sequence of images is continuously formed on the spotlight mode. We propose a new signal processing method to generate the multi-frames of ViSAR using Doppler shifting technique via sub-aperture processing. The method is based on our designed wide-angle antenna, which is a corrugated horn shape with low side lobe and Gaussian beam pattern. This wide-angle antenna receives a wide Doppler band along the azimuth direction. Based on the characteristics of the antenna, we separate the wide Doppler band into each chirp pulse signal. Each of these separated signals has a different center time. Through each chirp pulse signal in Doppler domain, the proposed method generates each frame of video at a high frame rate. The proposed ViSAR processing can show high efficiency with low computation and without a fixed coordinate system. Moreover, it can also visualize a wider area on stripmap mode than the conventional ViSAR mode, and can derive the video results based on Range Doppler Algorithm (RDA). These advantages can lead to reduce economic costs and simplify the operating ViSAR system. We have performed the practical experiments using X-band chirp pulse SAR system mounted on an airplane to verify the proposed method.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } The signal processing technologies of synthetic aperture radar (SAR) have been vastly studied as diverse measurement modes for various applications. One of the technologies is Video-SAR (ViSAR). It is a land-imaging mode where a sequence of images is continuously formed on the spotlight mode. We propose a new signal processing method to generate the multi-frames of ViSAR using Doppler shifting technique via sub-aperture processing. The method is based on our designed wide-angle antenna, which is a corrugated horn shape with low side lobe and Gaussian beam pattern. This wide-angle antenna receives a wide Doppler band along the azimuth direction. Based on the characteristics of the antenna, we separate the wide Doppler band into each chirp pulse signal. Each of these separated signals has a different center time. Through each chirp pulse signal in Doppler domain, the proposed method generates each frame of video at a high frame rate. The proposed ViSAR processing can show high efficiency with low computation and without a fixed coordinate system. Moreover, it can also visualize a wider area on stripmap mode than the conventional ViSAR mode, and can derive the video results based on Range Doppler Algorithm (RDA). These advantages can lead to reduce economic costs and simplify the operating ViSAR system. We have performed the practical experiments using X-band chirp pulse SAR system mounted on an airplane to verify the proposed method. |
348. | Laxmikant Minz; Hyunseong Kang; Seong-Ook Park Low Reflection Coefficient Ku-Band Antenna Array for FMCW Radar Application Journal Article Progress In Electromagnetics Research, 102 , pp. 127-137, 2020. Abstract | Links | BibTeX | 태그: International @article{Minz2020b, title = {Low Reflection Coefficient Ku-Band Antenna Array for FMCW Radar Application}, author = {Laxmikant Minz and Hyunseong Kang and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2021/03/09.20020302.pdf}, doi = {10.2528/PIERC20020302}, year = {2020}, date = {2020-05-25}, journal = {Progress In Electromagnetics Research}, volume = {102}, pages = {127-137}, abstract = {A radar for decisive target detection and tracking requires wideband, high return loss and high efficiency antenna array. In this paper, a 16 element staked-patch microstrip antenna array is presented at Ku-band with very low reflection coefficient for radar system. An aperture coupled feeding approach for a stack patch antenna is employed for wide bandwidth. A thin and low-loss tangent material, Taconic TLY-5, is used in the design of an antenna array to minimize the surface current loss and dielectric loss. Moreover, the antenna is designed with good impedance match, -30 dB, for high efficiency, by optimizing the stacked patches and utilizing reactive loading from u-slit on patch. For a low reflection coefficient antenna array over a wide bandwidth, an adequate feeding network consists of a compact and meandering stripline with metal-post around it is developed. The stripline configuration with metal-post minimizes crosstalk and lateral leakage. The feeding network developed has low reflection coefficient of -30 dB for the target band. The simulated feeding network loss is also low, 0.5 dB. The overall size of the 16 element array is compact, 295 mm x 30 mm (14λ x 1.425λ). The antenna array performance gives a reflection coefficient of -30 dB in the range of 14-14.5 GHz and total efficiency of 80%. The gain of the array is 21.54 dBi at 14.25 GHz.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } A radar for decisive target detection and tracking requires wideband, high return loss and high efficiency antenna array. In this paper, a 16 element staked-patch microstrip antenna array is presented at Ku-band with very low reflection coefficient for radar system. An aperture coupled feeding approach for a stack patch antenna is employed for wide bandwidth. A thin and low-loss tangent material, Taconic TLY-5, is used in the design of an antenna array to minimize the surface current loss and dielectric loss. Moreover, the antenna is designed with good impedance match, -30 dB, for high efficiency, by optimizing the stacked patches and utilizing reactive loading from u-slit on patch. For a low reflection coefficient antenna array over a wide bandwidth, an adequate feeding network consists of a compact and meandering stripline with metal-post around it is developed. The stripline configuration with metal-post minimizes crosstalk and lateral leakage. The feeding network developed has low reflection coefficient of -30 dB for the target band. The simulated feeding network loss is also low, 0.5 dB. The overall size of the 16 element array is compact, 295 mm x 30 mm (14λ x 1.425λ). The antenna array performance gives a reflection coefficient of -30 dB in the range of 14-14.5 GHz and total efficiency of 80%. The gain of the array is 21.54 dBi at 14.25 GHz. |
347. | Laxmikant Minz; Seong-Ook Park Beam scanning annular slot‐ring antenna array with via‐fence for wireless power transfer Journal Article International Journal of RF and Microwave Computer-Aided Engineering, 30 (6), 2020. Abstract | Links | BibTeX | 태그: International @article{Minz2020, title = {Beam scanning annular slot‐ring antenna array with via‐fence for wireless power transfer}, author = {Laxmikant Minz and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2020/09/Beam-scanning-annular-slot‐ring-antenna-array-with-via‐fence-for-wireless-power-transfer.pdf}, doi = {doi.org/10.1002/mmce.22178}, year = {2020}, date = {2020-02-17}, journal = {International Journal of RF and Microwave Computer-Aided Engineering}, volume = {30}, number = {6}, abstract = {Wireless power transfer has been the field of research for many decades, and with technological advancement and increase in wireless mobile devices, the future of wireless power transfer technology is very promising. The major requirement of wireless power transfer is an efficient and compact antenna array with high gain and flawless scanning performance. In this article, a 4 × 8 element array is proposed with a gain of 18 dB and scanning capability of ±45° in azimuth and elevation plane at 5.8 GHz. The overall size of the array is 100 mm × 200 mm. The element separation in the array is only 0.48 λ. There was strong mutual coupling due to smaller separation, which has been minimized with the application of via‐fence around the antenna element. A dual feed circularly polarized annular slot‐ring antenna is proposed and analyzed with via‐fence to develop an array of 4 × 8 elements. The antenna array reflection coefficient obtained is less than 20 dB for different scan angles and the gain of the array obtained is also within 2 dB for ±45° scan angles.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } Wireless power transfer has been the field of research for many decades, and with technological advancement and increase in wireless mobile devices, the future of wireless power transfer technology is very promising. The major requirement of wireless power transfer is an efficient and compact antenna array with high gain and flawless scanning performance. In this article, a 4 × 8 element array is proposed with a gain of 18 dB and scanning capability of ±45° in azimuth and elevation plane at 5.8 GHz. The overall size of the array is 100 mm × 200 mm. The element separation in the array is only 0.48 λ. There was strong mutual coupling due to smaller separation, which has been minimized with the application of via‐fence around the antenna element. A dual feed circularly polarized annular slot‐ring antenna is proposed and analyzed with via‐fence to develop an array of 4 × 8 elements. The antenna array reflection coefficient obtained is less than 20 dB for different scan angles and the gain of the array obtained is also within 2 dB for ±45° scan angles. |
346. | Chul-Ki Kim; Laxmikant Minz; Seong-Ook Park Improved Measurement Method of Material Properties Using Continuous Cavity Perturbation Without Relocation Journal Article IEEE Transactions on Instrumentation and Measurement, 69 (8), pp. 5702 - 5716, 2020. Abstract | Links | BibTeX | 태그: International @article{Kim2020d, title = {Improved Measurement Method of Material Properties Using Continuous Cavity Perturbation Without Relocation}, author = {Chul-Ki Kim and Laxmikant Minz and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2020/09/Improved-Measurement-Method-of-Material-Properties-Using-Continuous-Cavity-Perturbation-Without-Relocation.pdf}, doi = {10.1109/TIM.2020.2966358}, year = {2020}, date = {2020-01-14}, journal = {IEEE Transactions on Instrumentation and Measurement}, volume = {69}, number = {8}, pages = {5702 - 5716}, abstract = {Depolarized fields inside a magnetodielectric sample interfere with the accurate measurement of sample characteristics in a cavity perturbation method. These depolarized fields occur due to the polarization of the test sample, depending on the volume and shape of the sample, in the electromagnetic field. To characterize the magnetodielectric sample more accurately, we proposed an advanced rectangular cavity (RC) perturbation method. In this method, we investigated the change in the resonant frequency and Q-factor of a cavity which depends on the volume, and shape of the sample, and depolarized fields within the sample. The depolarizing factor for calculating the permittivity and permeability of the sample is derived by separating the uniform and depolarized fields within the sample when the sample is inserted in the cavity. These separations of fields play an important role to improve the measurement accuracy. The proposed unified RC perturbation technique is validated initially by measuring the resonant frequency and quality factor and then calculating the complex permittivity and permeability at the TE 10l mode. The standard dielectric material (Al 2 O 3 ) and magnetic material (YIG) samples are measured with the vector network analyzer. The measurement was performed when the magnetodielectric sample having various shapes and volumes inserted into the RC resonator. In comparison with the previous cavity perturbation methods, the permittivity and permeability have been calculated more accurately with various shapes of the test sample, and we also found that the ratio of the maximum sample volume to the cavity for various samples increases about 40%. Based on the proposed method, for a cube-shaped sample, we obtained the complex permittivity and permeability consecutively at each resonance mode without any physical relocation of the test sample. Therefore, the test sample is capable of continuous more accurate and more effective measurement in the desired frequency band without relocation using the proposed technique.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } Depolarized fields inside a magnetodielectric sample interfere with the accurate measurement of sample characteristics in a cavity perturbation method. These depolarized fields occur due to the polarization of the test sample, depending on the volume and shape of the sample, in the electromagnetic field. To characterize the magnetodielectric sample more accurately, we proposed an advanced rectangular cavity (RC) perturbation method. In this method, we investigated the change in the resonant frequency and Q-factor of a cavity which depends on the volume, and shape of the sample, and depolarized fields within the sample. The depolarizing factor for calculating the permittivity and permeability of the sample is derived by separating the uniform and depolarized fields within the sample when the sample is inserted in the cavity. These separations of fields play an important role to improve the measurement accuracy. The proposed unified RC perturbation technique is validated initially by measuring the resonant frequency and quality factor and then calculating the complex permittivity and permeability at the TE 10l mode. The standard dielectric material (Al 2 O 3 ) and magnetic material (YIG) samples are measured with the vector network analyzer. The measurement was performed when the magnetodielectric sample having various shapes and volumes inserted into the RC resonator. In comparison with the previous cavity perturbation methods, the permittivity and permeability have been calculated more accurately with various shapes of the test sample, and we also found that the ratio of the maximum sample volume to the cavity for various samples increases about 40%. Based on the proposed method, for a cube-shaped sample, we obtained the complex permittivity and permeability consecutively at each resonance mode without any physical relocation of the test sample. Therefore, the test sample is capable of continuous more accurate and more effective measurement in the desired frequency band without relocation using the proposed technique. |
345. | Junhyeong Park; Dae-Hwan Jung; Kyung-Bin Bae; Seong-Ook Park Range-Doppler Map Improvement in FMCW Radar for Small Moving Drone Detection Using the Stationary Point Concentration Technique Journal Article IEEE Transactions on Microwave Theory and Techniques, 68 (5), pp. 1858 - 1871, 2020. Abstract | Links | BibTeX | 태그: International @article{Park2020c, title = {Range-Doppler Map Improvement in FMCW Radar for Small Moving Drone Detection Using the Stationary Point Concentration Technique}, author = {Junhyeong Park and Dae-Hwan Jung and Kyung-Bin Bae and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2020/09/Range-Doppler-Map-Improvement-in-FMCW-Radar-for-Small-Moving-Drone-Detection-Using-the-Stationary-Point-Concentration-Technique.pdf}, doi = {10.1109/TMTT.2019.2961911}, year = {2020}, date = {2020-01-13}, journal = {IEEE Transactions on Microwave Theory and Techniques}, volume = {68}, number = {5}, pages = {1858 - 1871}, abstract = {Given the rapidly growing drone market, the development of drone detection radars has become highly important to prevent drones from damaging lives and property. Frequency-modulated continuous-wave (FMCW) radars have been frequently used for drone detection. Among the architectures of FMCW radar, a heterodyne architecture that involves different local oscillators and produces beat signals at the IF stage has often been chosen. The FMCW radar, however, has a chronic problem called leakage. In an earlier study, we proposed the stationary point concentration (SPC) technique to improve the signal-to-noise ratio (SNR) of small drones by reducing the increase in noise floor caused by leakage. We demonstrated that the proposed technique increases the SNR of small hovering drones in the 1-D power spectrum. In this article, we newly analyze the practical problems in the heterodyne FMCW radar system. One is the 2-D noise floor increase in the range-Doppler (r-D) map due to the leakage, and the other is unwanted Doppler shifts. Then, we propose an upgraded theory and realization method of the SPC technique for the detection of the small moving drone by improving the r-D map. We prove that the proposed method not only reduces the 2-D noise floor by mitigating the leakage but also removes the unwanted Doppler shifts by the phase calibration. Consequently, we show that the proposed method increases the SNR of the small moving drone and corrects its velocity information at the same time in the r-D map.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } Given the rapidly growing drone market, the development of drone detection radars has become highly important to prevent drones from damaging lives and property. Frequency-modulated continuous-wave (FMCW) radars have been frequently used for drone detection. Among the architectures of FMCW radar, a heterodyne architecture that involves different local oscillators and produces beat signals at the IF stage has often been chosen. The FMCW radar, however, has a chronic problem called leakage. In an earlier study, we proposed the stationary point concentration (SPC) technique to improve the signal-to-noise ratio (SNR) of small drones by reducing the increase in noise floor caused by leakage. We demonstrated that the proposed technique increases the SNR of small hovering drones in the 1-D power spectrum. In this article, we newly analyze the practical problems in the heterodyne FMCW radar system. One is the 2-D noise floor increase in the range-Doppler (r-D) map due to the leakage, and the other is unwanted Doppler shifts. Then, we propose an upgraded theory and realization method of the SPC technique for the detection of the small moving drone by improving the r-D map. We prove that the proposed method not only reduces the 2-D noise floor by mitigating the leakage but also removes the unwanted Doppler shifts by the phase calibration. Consequently, we show that the proposed method increases the SNR of the small moving drone and corrects its velocity information at the same time in the r-D map. |
2019 |
|
344. | Chan-Yong Jung; Kyung-Bin Bae; Dong-Chan Kim; Seong-Ook Park Internal Calibration System Using Learning Algorithm With Gradient Descent Journal Article IEEE Geoscience and Remote Sensing Letters, 17 (9), pp. 1503 - 1507, 2019. Abstract | Links | BibTeX | 태그: International @article{Jung2019d, title = {Internal Calibration System Using Learning Algorithm With Gradient Descent}, author = {Chan-Yong Jung and Kyung-Bin Bae and Dong-Chan Kim and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2020/09/Internal-Calibration-System-Using-Learning-Algorithm-With-Gradient-Descent.pdf}, doi = {10.1109/LGRS.2019.2950671}, year = {2019}, date = {2019-11-14}, journal = {IEEE Geoscience and Remote Sensing Letters}, volume = {17}, number = {9}, pages = {1503 - 1507}, abstract = {We present a novel approach to internal calibration of a radar system. A Ku-band radar system with internal calibration paths is designed. Thermal drift of a system is mainly caused by active components, which are a high-power amplifier (HPA) and a low-noise amplifier (LNA). We aimed to reduce the drift using a learning algorithm with a gradient-descent method. Hardware offset factors and calibration factors are introduced for the process. In the learning algorithm, a penalty term is formed based on the analysis of local minimum points. The result verifies the proposed internal calibration method. Maximum deviations of gain are 0.0477 dB for the HPA and 0.0132 dB for the LNA. In addition, the maximum deviations of phase are 0.2481° for HPA and 0.0722° for LNA, respectively.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } We present a novel approach to internal calibration of a radar system. A Ku-band radar system with internal calibration paths is designed. Thermal drift of a system is mainly caused by active components, which are a high-power amplifier (HPA) and a low-noise amplifier (LNA). We aimed to reduce the drift using a learning algorithm with a gradient-descent method. Hardware offset factors and calibration factors are introduced for the process. In the learning algorithm, a penalty term is formed based on the analysis of local minimum points. The result verifies the proposed internal calibration method. Maximum deviations of gain are 0.0477 dB for the HPA and 0.0132 dB for the LNA. In addition, the maximum deviations of phase are 0.2481° for HPA and 0.0722° for LNA, respectively. |
343. | Muhammad Tayyab Azim; Seong-Ook Park X-band Slotted Waveguide Antenna Conference 2019 International Symposium on Antennas and Propagation (ISAP), China, 2019. BibTeX | 태그: International @conference{Azim2019c, title = {X-band Slotted Waveguide Antenna}, author = {Muhammad Tayyab Azim and Seong-Ook Park}, year = {2019}, date = {2019-10-27}, booktitle = {2019 International Symposium on Antennas and Propagation (ISAP)}, address = {China}, keywords = {International}, pubstate = {published}, tppubtype = {conference} } |
342. | Junhyeong Park; Kyung-Bin Bae; Dae-Hwan Jung; Seong-Ook Park Micro-Drone Detection with FMCW Radar Based on Stationary Point Concentration Technique Conference 2019 International Symposium on Antennas and Propagation (ISAP), China, 2019. BibTeX | 태그: International @conference{Park2019, title = {Micro-Drone Detection with FMCW Radar Based on Stationary Point Concentration Technique}, author = {Junhyeong Park and Kyung-Bin Bae and Dae-Hwan Jung and Seong-Ook Park}, year = {2019}, date = {2019-10-27}, booktitle = {2019 International Symposium on Antennas and Propagation (ISAP)}, journal = {International Symposium on Antenna and Propagation}, address = {China}, keywords = {International}, pubstate = {published}, tppubtype = {conference} } |
341. | Young-Geun Kang; Chul-Ki Kim; Seong-Ook Park A Study of Multiple Image Acquisition on Stripmap SAR for Wide Beam Antenna and High Squint Case Conference 2019 International Symposium on Antennas and Propagation (ISAP), China, 2019. BibTeX | 태그: International @conference{Kang2019b, title = {A Study of Multiple Image Acquisition on Stripmap SAR for Wide Beam Antenna and High Squint Case}, author = {Young-Geun Kang and Chul-Ki Kim and Seong-Ook Park}, year = {2019}, date = {2019-10-27}, booktitle = {2019 International Symposium on Antennas and Propagation (ISAP)}, journal = {International Symposium on Antenna and Propagation}, address = {China}, keywords = {International}, pubstate = {published}, tppubtype = {conference} } |
340. | Kyung-Bin Bae; Junhyeong Park; Do-Hoon Kim; Seong-Ook Park Drone Detection with Linear Chirp Pulse Radar using Coherent Pulse Integration Conference 2019 International Symposium on Antennas and Propagation (ISAP), China, 2019. BibTeX | 태그: International @conference{Bae2019b, title = {Drone Detection with Linear Chirp Pulse Radar using Coherent Pulse Integration}, author = {Kyung-Bin Bae and Junhyeong Park and Do-Hoon Kim and Seong-Ook Park}, year = {2019}, date = {2019-10-27}, booktitle = {2019 International Symposium on Antennas and Propagation (ISAP)}, journal = {2019 International Symposium on Antennas and Propagation (ISAP)}, address = {China}, keywords = {International}, pubstate = {published}, tppubtype = {conference} } |
339. | Ashish Kumar Singh; Seong-Ook Park A deployable metamaterial reflectarray antenna for microsatellite application Conference 2019 International Symposium on Antennas and Propagation (ISAP), China, 2019. BibTeX | 태그: International @conference{Singh2019, title = {A deployable metamaterial reflectarray antenna for microsatellite application}, author = {Ashish Kumar Singh and Seong-Ook Park}, year = {2019}, date = {2019-10-27}, booktitle = {2019 International Symposium on Antennas and Propagation (ISAP)}, address = {China}, keywords = {International}, pubstate = {published}, tppubtype = {conference} } |
338. | Jun-Ho Kweon; Seong-Ook Park A New Pulse Compression Technique for Distorted Chirp-Pulse Signal Conference 2019 International Symposium on Antennas and Propagation (ISAP), China, 2019. BibTeX | 태그: International @conference{Kweon2019b, title = {A New Pulse Compression Technique for Distorted Chirp-Pulse Signal}, author = {Jun-Ho Kweon and Seong-Ook Park}, year = {2019}, date = {2019-10-27}, booktitle = {2019 International Symposium on Antennas and Propagation (ISAP)}, address = {China}, keywords = {International}, pubstate = {published}, tppubtype = {conference} } |
337. | Jun-Ho Kweon; Chan-Yong Jung; Kyung-Bin Bae; Seong-Ook Park 펄스 레이더 시스템의 Internal Calibration을 위한 Adam 및 AdaMax를 이용한 경사학습 알고리즘 구현 및 신호 추정 Conference 2019년 한국전자파학회 하계종합학술대회, 2019. @conference{Kweon2019, title = {펄스 레이더 시스템의 Internal Calibration을 위한 Adam 및 AdaMax를 이용한 경사학습 알고리즘 구현 및 신호 추정}, author = {Jun-Ho Kweon and Chan-Yong Jung and Kyung-Bin Bae and Seong-Ook Park}, year = {2019}, date = {2019-08-23}, booktitle = {2019년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
336. | Young-Geun Kang; Chul-Ki Kim; Seong-Ook Park 변형된 도플러 추정 기법을 활용한 X-band Airborne SAR 이미지 개선에 관한 연구 Conference 2019년 한국전자파학회 하계종합학술대회, 2019. @conference{Kang2019, title = {변형된 도플러 추정 기법을 활용한 X-band Airborne SAR 이미지 개선에 관한 연구}, author = {Young-Geun Kang and Chul-Ki Kim and Seong-Ook Park}, year = {2019}, date = {2019-08-23}, booktitle = {2019년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
335. | Chul-Ki Kim; Young-Geun Kang; Seong-Ook Park Doppler shifting 방법을 이용한 Video-SAR 이미지 추출 방법 Conference 2019년 한국전자파학회 하계종합학술대회, 2019. @conference{Kim2019, title = {Doppler shifting 방법을 이용한 Video-SAR 이미지 추출 방법}, author = {Chul-Ki Kim and Young-Geun Kang and Seong-Ook Park}, year = {2019}, date = {2019-08-23}, booktitle = {2019년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
334. | Kyung-Bin Bae; Junhyeong Park; Seong-Ook Park 소형 Drone 탐지를 위한 Chirp pulse 레이다 시스템 Conference 2019년 한국전자파학회 하계종합학술대회, 2019. @conference{Bae2019, title = {소형 Drone 탐지를 위한 Chirp pulse 레이다 시스템}, author = {Kyung-Bin Bae and Junhyeong Park and Seong-Ook Park}, year = {2019}, date = {2019-08-23}, booktitle = {2019년 한국전자파학회 하계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
333. | Dae-Hwan Jung; Hyun-Seong Kang; Chul-Ki Kim; Junhyeong Park; Seong-Ook Park Sparse Scene Recovery for High-Resolution Automobile FMCW SAR via Scaled Compressed Sensing Journal Article IEEE Transactions on Geoscience and Remote Sensing, 57 (12), pp. 10136 - 10146, 2019. Abstract | Links | BibTeX | 태그: International @article{Jung2019c, title = {Sparse Scene Recovery for High-Resolution Automobile FMCW SAR via Scaled Compressed Sensing}, author = {Dae-Hwan Jung and Hyun-Seong Kang and Chul-Ki Kim and Junhyeong Park and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2020/02/08805113-2.pdf}, doi = {10.1109/TGRS.2019.2931626}, year = {2019}, date = {2019-08-19}, journal = {IEEE Transactions on Geoscience and Remote Sensing}, volume = {57}, number = {12}, pages = {10136 - 10146}, abstract = {This paper introduces a sparse scene reconstruction algorithm for automobile frequency-modulated continuous-wave synthetic aperture radar (FMCW SAR) through scaled compressed sensing (CS). An FMCW radar leads to low manufacturing cost, compact realization, and low transmission power. An automobile SAR is more economical and easier to implement than typical SAR platforms (e.g., satellites and aircraft). We apply CS to randomly subsampled raw data of automobile FMCW SAR for sparse reconstruction. We exploit the fact that the velocity of an automobile is significantly lower than that of the SAR platforms, which leads to a vastly narrow bandwidth of an azimuth-matched filter in the azimuth compression of the range-Doppler algorithm (RDA). Low-frequency azimuth data have a fundamental effect on azimuth compression. We propose a new reconstruction scheme, scaled CS, which specializes in low-frequency information recovery for automobile SAR. The scheme is based on basis pursuit denoising (BPDN). A Ku-band FMCW SAR system is developed to verify the performance of the proposed algorithm. We mount our system on an automobile and collect FMCW SAR raw data in the stripmap mode with a van maintained a constant speed on a highway. The proposed reconstruction algorithm shows improved recovery performance for automobile FMCW SAR, which is validated by processing a high-resolution real SAR image.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } This paper introduces a sparse scene reconstruction algorithm for automobile frequency-modulated continuous-wave synthetic aperture radar (FMCW SAR) through scaled compressed sensing (CS). An FMCW radar leads to low manufacturing cost, compact realization, and low transmission power. An automobile SAR is more economical and easier to implement than typical SAR platforms (e.g., satellites and aircraft). We apply CS to randomly subsampled raw data of automobile FMCW SAR for sparse reconstruction. We exploit the fact that the velocity of an automobile is significantly lower than that of the SAR platforms, which leads to a vastly narrow bandwidth of an azimuth-matched filter in the azimuth compression of the range-Doppler algorithm (RDA). Low-frequency azimuth data have a fundamental effect on azimuth compression. We propose a new reconstruction scheme, scaled CS, which specializes in low-frequency information recovery for automobile SAR. The scheme is based on basis pursuit denoising (BPDN). A Ku-band FMCW SAR system is developed to verify the performance of the proposed algorithm. We mount our system on an automobile and collect FMCW SAR raw data in the stripmap mode with a van maintained a constant speed on a highway. The proposed reconstruction algorithm shows improved recovery performance for automobile FMCW SAR, which is validated by processing a high-resolution real SAR image. |
332. | Laxmikant Minz; Seong-Ook Park Mutual Coupling Reduction using Via Fence in Microstrip Antenna Conference Asia-Pacific Conference on Antennas and Propagation(APCAP 2019), Korea, 2019. BibTeX | 태그: International @conference{Minz2019, title = {Mutual Coupling Reduction using Via Fence in Microstrip Antenna}, author = {Laxmikant Minz and Seong-Ook Park}, year = {2019}, date = {2019-08-07}, booktitle = {Asia-Pacific Conference on Antennas and Propagation(APCAP 2019)}, address = {Korea}, keywords = {International}, pubstate = {published}, tppubtype = {conference} } |
331. | Rao Shahid Aziz; Seong-Ook Park Millimeter-Wave Planar Electromagentic Lens Design Using Frequency-Selective Surfaces Conference Asia-Pacific Conference on Antennas and Propagation(APCAP 2019), Korea, 2019. BibTeX | 태그: International @conference{Aziz2019b, title = {Millimeter-Wave Planar Electromagentic Lens Design Using Frequency-Selective Surfaces}, author = {Rao Shahid Aziz and Seong-Ook Park}, year = {2019}, date = {2019-08-07}, booktitle = {Asia-Pacific Conference on Antennas and Propagation(APCAP 2019)}, journal = {The 8th Asia-Pacific Conference on Antennas and Propagation (APCAP 2019)}, address = {Korea}, keywords = {International}, pubstate = {published}, tppubtype = {conference} } |
330. | Muhammad Tayyab Azim; Junhyeong Park; Seong-Ook Park Ku-band Rotary Joint Conference Asia-Pacific Conference on Antennas and Propagation(APCAP 2019), Korea, 2019. BibTeX | 태그: International @conference{Azim2019b, title = {Ku-band Rotary Joint}, author = {Muhammad Tayyab Azim and Junhyeong Park and Seong-Ook Park}, year = {2019}, date = {2019-08-06}, booktitle = {Asia-Pacific Conference on Antennas and Propagation(APCAP 2019)}, address = {Korea}, keywords = {International}, pubstate = {published}, tppubtype = {conference} } |
329. | Chul-Ki Kim; Jung-Su Lee; Jang-Soo Chae; Seong-Ook Park A Modified Stripmap SAR Processing for Vector Velocity Compensation Using the Cross-Correlation Estimation Method Journal Article Journal of Electromagnetic Engineering and Science, 19 (3), pp. 159-165, 2019. Abstract | Links | BibTeX | 태그: International @article{Kim2019c, title = {A Modified Stripmap SAR Processing for Vector Velocity Compensation Using the Cross-Correlation Estimation Method}, author = {Chul-Ki Kim and Jung-Su Lee and Jang-Soo Chae and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2020/03/jees-2019-19-3-159.pdf}, doi = {doi.org/10.26866/jees.2019.19.3.159}, year = {2019}, date = {2019-07-31}, journal = {Journal of Electromagnetic Engineering and Science}, volume = {19}, number = {3}, pages = {159-165}, abstract = {This paper proposes a modified stripmap synthetic aperture radar (SAR) signal processing algorithm with an X-band SAR system, using the practical measurement results of automobile-based SAR (Auto-SAR). The quality of the image is degraded due to an unexpected direction change or anisotropy of the target position in radar image measurement. To solve the quality problem, signal processing is required for the vector velocity of each range in the azimuth direction. An X-band chirp pulse system was implemented and optimized by a signal processing algorithm suitable for high resolution. The stripmap SAR images are produced in five places. The validity of the proposed algorithm is verified by comparing impulse response function analysis and experimental images.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } This paper proposes a modified stripmap synthetic aperture radar (SAR) signal processing algorithm with an X-band SAR system, using the practical measurement results of automobile-based SAR (Auto-SAR). The quality of the image is degraded due to an unexpected direction change or anisotropy of the target position in radar image measurement. To solve the quality problem, signal processing is required for the vector velocity of each range in the azimuth direction. An X-band chirp pulse system was implemented and optimized by a signal processing algorithm suitable for high resolution. The stripmap SAR images are produced in five places. The validity of the proposed algorithm is verified by comparing impulse response function analysis and experimental images. |
328. | Tae-Wan Kim; Seong-Ook Park Enhanced gain and miniaturisation method of stacked dielectric resonator antenna using metallic cap Journal Article IET Microwaves, Antennas & Propagation, 13 (8), pp. 1198 - 1201, 2019. Abstract | Links | BibTeX | 태그: International @article{Kim2019b, title = {Enhanced gain and miniaturisation method of stacked dielectric resonator antenna using metallic cap}, author = {Tae-Wan Kim and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2020/02/08744166.pdf}, doi = {10.1049/iet-map.2018.5606}, year = {2019}, date = {2019-06-24}, journal = {IET Microwaves, Antennas & Propagation}, volume = {13}, number = {8}, pages = {1198 - 1201}, abstract = {The authors introduce a miniature and gain enhancement method of dielectric resonator antenna (DRA) using a metallic cap. The structure of the proposed antenna consists of a stacked cylindrical dielectric resonator, a metallic cap that is located on the resonator, and a ground plane. By adjusting the size of the metallic cap while retaining the size of the antenna, the proposed antenna operates in the lower frequency band and shows improved realised gain. As the radius of metallic cap increases, wavelength at z -axis increases and the resonance frequency gets lower. In addition, tangential field at side wall surface increases, which leads to the enhancement of realised gain at resonance frequency. The authors have fabricated a prototype of the antenna for the experimental verification. The simulation results are in a close agreement with the experimental finding.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } The authors introduce a miniature and gain enhancement method of dielectric resonator antenna (DRA) using a metallic cap. The structure of the proposed antenna consists of a stacked cylindrical dielectric resonator, a metallic cap that is located on the resonator, and a ground plane. By adjusting the size of the metallic cap while retaining the size of the antenna, the proposed antenna operates in the lower frequency band and shows improved realised gain. As the radius of metallic cap increases, wavelength at z -axis increases and the resonance frequency gets lower. In addition, tangential field at side wall surface increases, which leads to the enhancement of realised gain at resonance frequency. The authors have fabricated a prototype of the antenna for the experimental verification. The simulation results are in a close agreement with the experimental finding. |
327. | Rao Shahid Aziz; Tae-Wan Kim; Jae-Seok Park; Young-Ho Ryu; Seong-Ook Park EM lens design using thin planar metasurfaces for high antenna gain and low SLL applications Journal Article IET Microwaves, Antennas & Propagation, 13 (7), pp. 950- - 958, 2019. Abstract | Links | BibTeX | 태그: International @article{Aziz2019, title = {EM lens design using thin planar metasurfaces for high antenna gain and low SLL applications}, author = {Rao Shahid Aziz and Tae-Wan Kim and Jae-Seok Park and Young-Ho Ryu and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2020/02/EM-lens-design-using-thin-planar-metasurfaces-for-high-antenna-gain-and-low-SLL-applications-2.pdf}, doi = {10.1049/iet-map.2018.5671}, year = {2019}, date = {2019-06-20}, journal = {IET Microwaves, Antennas & Propagation}, volume = {13}, number = {7}, pages = {950- - 958}, abstract = {A novel electromagnetic (EM) lens with high gain, suppressed side-lobe level (SLL) and low profile is designed using thin planar metasurfaces. The proposed design consists of a source patch antenna and an EM lens based on two thin planar metasurfaces. The two thin metasurfaces with an air gap are placed at the focal distance H of about λ /2.25 above the source patch antenna. This configuration forms a thin planar lens in which the source patch antenna emitted quasi-spherical wave in order to transform into plane wave. The total size of source antenna and an EM lens is same. The miniaturised EM lens antenna faces high SLL, which can be reduced by maintaining the uniform transmission phase coefficient and tunable transmission amplitude coefficient of metasurface unit cells. By implementing this topology on metasurfaces, the SLL of the proposed EM lens can be reduced without affecting the boresight gain of source patch antenna. The measured results of the proposed EM lens achieve 7 dB gain enhancement at designed frequency (5.8 GHz) with the SLL suppression of -24 dB. The total volume of planar lens antenna is 1.17 λ × 1.17 λ × λ /2.25 mm 3 , which is very compact compared with other reported planar lens designs.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } A novel electromagnetic (EM) lens with high gain, suppressed side-lobe level (SLL) and low profile is designed using thin planar metasurfaces. The proposed design consists of a source patch antenna and an EM lens based on two thin planar metasurfaces. The two thin metasurfaces with an air gap are placed at the focal distance H of about λ /2.25 above the source patch antenna. This configuration forms a thin planar lens in which the source patch antenna emitted quasi-spherical wave in order to transform into plane wave. The total size of source antenna and an EM lens is same. The miniaturised EM lens antenna faces high SLL, which can be reduced by maintaining the uniform transmission phase coefficient and tunable transmission amplitude coefficient of metasurface unit cells. By implementing this topology on metasurfaces, the SLL of the proposed EM lens can be reduced without affecting the boresight gain of source patch antenna. The measured results of the proposed EM lens achieve 7 dB gain enhancement at designed frequency (5.8 GHz) with the SLL suppression of -24 dB. The total volume of planar lens antenna is 1.17 λ × 1.17 λ × λ /2.25 mm 3 , which is very compact compared with other reported planar lens designs. |
326. | Muhammad Tayyab Azim; Junhyeong Park; Seong-Ook Park Contactless Linear Rotary Joint at Ku-Band Journal Article IEEE Antennas and Wireless Propagation Letters, 29 (6), pp. 373 - 375, 2019. Abstract | Links | BibTeX | 태그: International @article{Azim2019, title = {Contactless Linear Rotary Joint at Ku-Band}, author = {Muhammad Tayyab Azim and Junhyeong Park and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2019/06/08708983.pdf}, doi = {10.1109/LMWC.2019.2912271}, year = {2019}, date = {2019-05-07}, journal = {IEEE Antennas and Wireless Propagation Letters}, volume = {29}, number = {6}, pages = {373 - 375}, abstract = {Our laboratory has developed a drone detection radar that involves a mechanical scanning antenna. Radar and antenna systems that have mechanical scanning require an additional component called a rotary joint (RJ). The purpose of RJ in scanning assemblies is to provide an uninterrupted link between the antenna and the transceiver. In our system, antenna and transceiver are linearly polarized and use TE 10 mode along the rectangular waveguide section. TE 10 modes are asymmetric in nature making them incompatible with the rotating motion of the antenna. An RJ is presented with back-to-back mode transitions using symmetric modes along the circular waveguide and contactless branch line joint. The mode used along the circular waveguide for symmetry purpose is TM 01 . An I-type linear RJ topology is selected due to lack of space along the lateral directions and system configuration. The problem of antenna matching while scanning was solved at 14.0–14.5 GHz at Ku -band using single-channel linear RJ.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } Our laboratory has developed a drone detection radar that involves a mechanical scanning antenna. Radar and antenna systems that have mechanical scanning require an additional component called a rotary joint (RJ). The purpose of RJ in scanning assemblies is to provide an uninterrupted link between the antenna and the transceiver. In our system, antenna and transceiver are linearly polarized and use TE 10 mode along the rectangular waveguide section. TE 10 modes are asymmetric in nature making them incompatible with the rotating motion of the antenna. An RJ is presented with back-to-back mode transitions using symmetric modes along the circular waveguide and contactless branch line joint. The mode used along the circular waveguide for symmetry purpose is TM 01 . An I-type linear RJ topology is selected due to lack of space along the lateral directions and system configuration. The problem of antenna matching while scanning was solved at 14.0–14.5 GHz at Ku -band using single-channel linear RJ. |
325. | Woncheol Lee; Yang-Ki Hong; Hoyun Won; Minyeong Choi; Katelyn Isbell; Jaejin Lee; Tae-Wan Kim; Seong-Ook Park Lossy Ferrite Core-Dielectric Shell Structure for Miniature GHz Axial-Mode Helical Antenna Journal Article IEEE Antennas and Wireless Propagation Letters, 18 (5), pp. 951 - 955, 2019. Abstract | Links | BibTeX | 태그: International @article{Lee2018b, title = {Lossy Ferrite Core-Dielectric Shell Structure for Miniature GHz Axial-Mode Helical Antenna}, author = {Woncheol Lee and Yang-Ki Hong and Hoyun Won and Minyeong Choi and Katelyn Isbell and Jaejin Lee and Tae-Wan Kim and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2019/06/08675390-1.pdf}, doi = {10.1109/LAWP.2019.2906505}, year = {2019}, date = {2019-03-27}, journal = {IEEE Antennas and Wireless Propagation Letters}, volume = {18}, number = {5}, pages = {951 - 955}, abstract = {A lossy ferrite core/dielectric shell structure effectively miniaturizes an axial-mode helical antenna (AM-HA) without sacrificing the antenna gain in the range of 2.85-3.45 GHz. Co 2 Z hexaferrite-glass composite was used as an inner core and acrylonitrile butadiene styrene as an outer shell. The volume of the AM-HA was reduced by 29% while maintaining realized gain of 9.0 dBic, compared to air-core AM-HA. The simulation also confirmed that further miniaturization of the AM-HA up to 43% is achievable with a slight decrease in realized gain from 9 to 8.7 dBic. The designed magnetic core/dielectric shell structure offers a vast selection of lossy ferrite for miniaturization of the AM-HA.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } A lossy ferrite core/dielectric shell structure effectively miniaturizes an axial-mode helical antenna (AM-HA) without sacrificing the antenna gain in the range of 2.85-3.45 GHz. Co 2 Z hexaferrite-glass composite was used as an inner core and acrylonitrile butadiene styrene as an outer shell. The volume of the AM-HA was reduced by 29% while maintaining realized gain of 9.0 dBic, compared to air-core AM-HA. The simulation also confirmed that further miniaturization of the AM-HA up to 43% is achievable with a slight decrease in realized gain from 9 to 8.7 dBic. The designed magnetic core/dielectric shell structure offers a vast selection of lossy ferrite for miniaturization of the AM-HA. |
324. | Dong-Chan Kim; Seong-Jin Park; Tae-Wan Kim; Laxmikant Minz; Seong-Ook Park Fully Digital Beamforming Receiver With a Real-Time Calibration for 5G Mobile Communication Journal Article IEEE Transactions on Antennas and Propagation, 67 (6), pp. 3809 - 3819, 2019. Abstract | Links | BibTeX | 태그: International @article{Kim2017n, title = {Fully Digital Beamforming Receiver With a Real-Time Calibration for 5G Mobile Communication}, author = {Dong-Chan Kim and Seong-Jin Park and Tae-Wan Kim and Laxmikant Minz and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2019/06/08657999_1.pdf}, doi = {10.1109/TAP.2019.2902712}, year = {2019}, date = {2019-03-04}, journal = {IEEE Transactions on Antennas and Propagation}, volume = {67}, number = {6}, pages = {3809 - 3819}, abstract = {This paper presents a fully digital beamforming receiver (FDBR) using a method that calibrates the signals of all chains in real time, and is targeted for 5G mobile communication. In the real-time calibration method, the received signals of all chains are adjusted to correct the errors of phase and amplitude using the in-band signal other than operating frequency for calibration. The proposed FDBR with real-time calibration is designed and fabricated. The FDBR consists of eight chains of the tapered slot antenna (TSA) element, low noise block (LNB), and software defined radios (SDRs). The 1 × 8 array TSA with the directional coupler and the 1:8 divider is designed to send eight uniform calibration signals along with the received signal of all the chains. In SDR, the digital phase shifter and the real-time calibration blocks are implemented to realize digital beamforming. The digital phase shifter has an extremely high resolution of 0.72°. After using the real-time calibration method, the average of measured phase and amplitude error between each chain is less than 0.9° and 0.5 dB, respectively. To verify the beamforming performance of the FDBR, the simulation radiation pattern and the measurement radiation pattern are compared for 0°, ±15°, ±30°, and ±45° beam angles. The simulation results are in good agreement with the measured results. An excellent beamforming performance is achieved in the 1 × 8 array FDBR using the real-time calibration.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } This paper presents a fully digital beamforming receiver (FDBR) using a method that calibrates the signals of all chains in real time, and is targeted for 5G mobile communication. In the real-time calibration method, the received signals of all chains are adjusted to correct the errors of phase and amplitude using the in-band signal other than operating frequency for calibration. The proposed FDBR with real-time calibration is designed and fabricated. The FDBR consists of eight chains of the tapered slot antenna (TSA) element, low noise block (LNB), and software defined radios (SDRs). The 1 × 8 array TSA with the directional coupler and the 1:8 divider is designed to send eight uniform calibration signals along with the received signal of all the chains. In SDR, the digital phase shifter and the real-time calibration blocks are implemented to realize digital beamforming. The digital phase shifter has an extremely high resolution of 0.72°. After using the real-time calibration method, the average of measured phase and amplitude error between each chain is less than 0.9° and 0.5 dB, respectively. To verify the beamforming performance of the FDBR, the simulation radiation pattern and the measurement radiation pattern are compared for 0°, ±15°, ±30°, and ±45° beam angles. The simulation results are in good agreement with the measured results. An excellent beamforming performance is achieved in the 1 × 8 array FDBR using the real-time calibration. |
323. | Chan-Yong Jung; Seong-Ook Park Ku-Band 대역 Internal Calibration System의 구현 및 성능 분석 Conference 한국전자파학회 동계종합학술대회, 2019. @conference{Jung2019, title = {Ku-Band 대역 Internal Calibration System의 구현 및 성능 분석}, author = {Chan-Yong Jung and Seong-Ook Park}, year = {2019}, date = {2019-02-21}, booktitle = {한국전자파학회 동계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
322. | Dae-Hwan Jung; Seong-Ook Park 압축 센싱을 이용한 차량용 FMCW SAR 이미지 복구 방법 Conference 한국전자파학회 동계종합학술대회, 2019. @conference{Jung2019b, title = {압축 센싱을 이용한 차량용 FMCW SAR 이미지 복구 방법}, author = {Dae-Hwan Jung and Seong-Ook Park}, year = {2019}, date = {2019-02-21}, booktitle = {한국전자파학회 동계종합학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
321. | Junhyeong Park; Seungwoon Park; Do-Hoon Kim; Seong-Ook Park Leakage Mitigation in Heterodyne FMCW RADAR for Small Drone Detection With Stationary Point Concentration Technique Journal Article IEEE Transactions on Microwave Theory and Techniques, 67 (3), pp. 1221 - 1232, 2019. Abstract | Links | BibTeX | 태그: International @article{Park2017eb, title = {Leakage Mitigation in Heterodyne FMCW RADAR for Small Drone Detection With Stationary Point Concentration Technique}, author = {Junhyeong Park and Seungwoon Park and Do-Hoon Kim and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2019/06/Leakage-Mitigation-in-Heterodyne-FMCW-RADAR-for-Small-Drone-Detection-With-Stationary-Point-Concentration-Technique.pdf}, doi = {10.1109/TMTT.2018.2889045}, year = {2019}, date = {2019-01-08}, journal = {IEEE Transactions on Microwave Theory and Techniques}, volume = {67}, number = {3}, pages = {1221 - 1232}, abstract = {To prevent potential hazards posed by fast-evolving drones, it is of importance to develop a radar system for drone detection. Frequency modulated continuous wave (FMCW) radars are widely used for that purpose. Heterodyne architectures are preferred for them to mitigate dc offset errors. Having said that, FMCW radars suffer from permanent leakage from the transmitter into the receiver. The leakage phase noise raises the total noise floor and limits the radar sensitivity. Here, we propose a stationary point concentration (SPC) technique in order to overcome the challenges. The SPC technique concentrates the leakage phase noise on a stationary point to alleviate the impact of the noise. The technique can be realized using digital signal processing without additional hardware. The results show that the proposed technique significantly lowers the noise floor.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } To prevent potential hazards posed by fast-evolving drones, it is of importance to develop a radar system for drone detection. Frequency modulated continuous wave (FMCW) radars are widely used for that purpose. Heterodyne architectures are preferred for them to mitigate dc offset errors. Having said that, FMCW radars suffer from permanent leakage from the transmitter into the receiver. The leakage phase noise raises the total noise floor and limits the radar sensitivity. Here, we propose a stationary point concentration (SPC) technique in order to overcome the challenges. The SPC technique concentrates the leakage phase noise on a stationary point to alleviate the impact of the noise. The technique can be realized using digital signal processing without additional hardware. The results show that the proposed technique significantly lowers the noise floor. |
2018 |
|
320. | Dong-Uk Sim; Sang-Il Kwak; Jong-Hwa Kwon; Seong-Ook Park Microwave and Optical Technology Letters, 61 (3), pp. 801 - 804, 2018. Abstract | Links | BibTeX | 태그: International @article{Sim2018b, title = {Design of new reverberation chamber for electromagnetic compatibility and wireless device measurement applications and its reproducibility performance validation}, author = {Dong-Uk Sim and Sang-Il Kwak and Jong-Hwa Kwon and Seong-Ook Park}, url = {http://ma.kaist.ac.kr/wp-content/uploads/2020/02/Sim_et_al-2019-Microwave_and_Optical_Technology_Letters.pdf}, doi = {http://dx.doi.org/10.1002/mop.31644}, year = {2018}, date = {2018-11-26}, journal = {Microwave and Optical Technology Letters}, volume = {61}, number = {3}, pages = {801 - 804}, abstract = {This article proposes new reverberation chamber structure for electromagnetic compatibility and wireless device measurement applications. It consists of dual plate type mode stirrers and two types of reflectors that improve its original field uniformity. Based on the SD and eigenmode analysis, their effect is demonstrated, and through the final measured results, it is shown that the proposed reverberation chamber has excellent SD characteristic of <2.5 dB at 650 MHz or higher. In addition, from the viewpoint of its utilization, it is verified that for over the air performance of a commercial long‐term evolution mobile phone, its experimental reproducibility is very high, and its results show little difference from those obtained in the anechoic chamber.}, keywords = {International}, pubstate = {published}, tppubtype = {article} } This article proposes new reverberation chamber structure for electromagnetic compatibility and wireless device measurement applications. It consists of dual plate type mode stirrers and two types of reflectors that improve its original field uniformity. Based on the SD and eigenmode analysis, their effect is demonstrated, and through the final measured results, it is shown that the proposed reverberation chamber has excellent SD characteristic of <2.5 dB at 650 MHz or higher. In addition, from the viewpoint of its utilization, it is verified that for over the air performance of a commercial long‐term evolution mobile phone, its experimental reproducibility is very high, and its results show little difference from those obtained in the anechoic chamber. |
319. | Chul-Ki Kim; Seong-Ook Park 차량탑재 형 X-band SAR를 위한 Range Doppler 알고리즘 개발 Conference 한국전자파학회 제 30차 정기총회 및 추계학술대회, 2018. @conference{Kim2018h, title = {차량탑재 형 X-band SAR를 위한 Range Doppler 알고리즘 개발}, author = {Chul-Ki Kim and Seong-Ook Park}, year = {2018}, date = {2018-11-23}, booktitle = {한국전자파학회 제 30차 정기총회 및 추계학술대회}, keywords = {Domestic}, pubstate = {published}, tppubtype = {conference} } |
318. | Tae-Wan Kim; Seong-Ook Park Analysis of Stacked Dielectric Resonator Antenna Conference 2018 International Symposium on Antennas and Propagation (ISAP), Korea, 2018. BibTeX | 태그: International @conference{Kim2018f, title = {Analysis of Stacked Dielectric Resonator Antenna}, author = {Tae-Wan Kim and Seong-Ook Park}, year = {2018}, date = {2018-10-23}, booktitle = {2018 International Symposium on Antennas and Propagation (ISAP)}, address = {Korea}, keywords = {International}, pubstate = {published}, tppubtype = {conference} } |
Publications
2021 |
|
367. | NLFM pulse radar for drone detection using predistortion technique Journal Article Journal of Electromagnetic Waves and Applications, 35 (3), pp. 416 - 429, 2021. |
366. | Strategic method of determining parameter values in frequency modulated continuous wave radar for low noise floor over middle‐long range Journal Article Microwave and Optical Technology Letters, 2021. |
365. | Advanced stationary point concentration technique for leakage mitigation and small drone detection with FMCW radar Journal Article IEEE Transactions on Microwave Theory and Techniques, 69 (3), pp. 1791 - 1804, 2021. |
364. | Improved Drone Detection in FMCW Radar using SPC Technique Conference 2020 International Symposium on Antennas and Propagation (ISAP), Japan, 2021. |
2020 |
|
363. | 합성곱 신경망을 이용한 향상된 드론의 고도각 식별을 위한 다중 편파 미세 도플러 정보 분석 Conference 2020년 한국전자파학회 추계학술대회, 2020. |
362. | Drone Elevation Angle Classification Based on Convolutional Neural Network With Micro-Doppler of Multipolarization Journal Article IEEE Geoscience and Remote Sensing Letters, 2020. |
361. | Theoretical Model for Resonant Frequency of Rectangular Microstrip Patch Antenna on Liquid Crystal Substrate Conference 2020년 한국전자파학회 하계종합학술대회, 2020. |
360. | Gain Improvement with Meta-Surface(MS) Lens for Dual-Polarized Horn Antenna using Tangential Phase Compensation Technique Conference 2020년 한국전자파학회 하계종합학술대회, 2020. |
359. | 위성 고도계의 Burst 펄스 전송 기법을 활용한 고주파 SAR 알고리즘 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. |
358. | 광각안테나(Wide-Angle Antenna)를 이용한 Video-SAR Frame 추출법 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. |
357. | Liquid Crystal 원통형 공진기의 밀리미터파 공진 주파수 계산 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. |
356. | Quadrature mixer 을 이용한 밀리미터파 대역 다중 시스템 간의 위상 제어 시스템 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. |
355. | 초소형 위성용 합성개구레이더(SAR) 탑재체 기술소개 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. |
354. | Chirp Pulse 레이다에 적용 가능한 Micro-Doppler Signature 추출 기법 및 이를 이용한 소형 드론 탐지 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. |
353. | 저잡음 레이다 시스템 설계 Conference 2020년 한국전자파학회 하계종합학술대회, 2020. |
352. | Improved Drone Classification Using Polarimetric Merged-Doppler Images Journal Article IEEE Geoscience and Remote Sensing Letters, 2020. |
351. | Measurement and Analysis of Radiation Leakage From a GPS Module for the Detection of Drones Journal Article IEEE Antennas and Wireless Propagation Letters, 19 (9), pp. 1610 - 1614, 2020. |
350. | A Novel Signal Processing Technique for Ku-Band Automobile FMCW Fully Polarimetric SAR System Using Triangular LFM Journal Article IEEE Transactions on Instrumentation and Measurement, 2020. |
349. | Doppler Shifting Technique for Generating Multi-Frames of Video SAR via Sub-Aperture Signal Processing Journal Article IEEE Transactions on Signal Processing, 68 , pp. 3990 - 4001, 2020. |
348. | Low Reflection Coefficient Ku-Band Antenna Array for FMCW Radar Application Journal Article Progress In Electromagnetics Research, 102 , pp. 127-137, 2020. |
347. | Beam scanning annular slot‐ring antenna array with via‐fence for wireless power transfer Journal Article International Journal of RF and Microwave Computer-Aided Engineering, 30 (6), 2020. |
346. | Improved Measurement Method of Material Properties Using Continuous Cavity Perturbation Without Relocation Journal Article IEEE Transactions on Instrumentation and Measurement, 69 (8), pp. 5702 - 5716, 2020. |
345. | Range-Doppler Map Improvement in FMCW Radar for Small Moving Drone Detection Using the Stationary Point Concentration Technique Journal Article IEEE Transactions on Microwave Theory and Techniques, 68 (5), pp. 1858 - 1871, 2020. |
2019 |
|
344. | Internal Calibration System Using Learning Algorithm With Gradient Descent Journal Article IEEE Geoscience and Remote Sensing Letters, 17 (9), pp. 1503 - 1507, 2019. |
343. | X-band Slotted Waveguide Antenna Conference 2019 International Symposium on Antennas and Propagation (ISAP), China, 2019. |
342. | Micro-Drone Detection with FMCW Radar Based on Stationary Point Concentration Technique Conference 2019 International Symposium on Antennas and Propagation (ISAP), China, 2019. |
341. | A Study of Multiple Image Acquisition on Stripmap SAR for Wide Beam Antenna and High Squint Case Conference 2019 International Symposium on Antennas and Propagation (ISAP), China, 2019. |
340. | Drone Detection with Linear Chirp Pulse Radar using Coherent Pulse Integration Conference 2019 International Symposium on Antennas and Propagation (ISAP), China, 2019. |
339. | A deployable metamaterial reflectarray antenna for microsatellite application Conference 2019 International Symposium on Antennas and Propagation (ISAP), China, 2019. |
338. | A New Pulse Compression Technique for Distorted Chirp-Pulse Signal Conference 2019 International Symposium on Antennas and Propagation (ISAP), China, 2019. |
337. | 펄스 레이더 시스템의 Internal Calibration을 위한 Adam 및 AdaMax를 이용한 경사학습 알고리즘 구현 및 신호 추정 Conference 2019년 한국전자파학회 하계종합학술대회, 2019. |
336. | 변형된 도플러 추정 기법을 활용한 X-band Airborne SAR 이미지 개선에 관한 연구 Conference 2019년 한국전자파학회 하계종합학술대회, 2019. |
335. | Doppler shifting 방법을 이용한 Video-SAR 이미지 추출 방법 Conference 2019년 한국전자파학회 하계종합학술대회, 2019. |
334. | 소형 Drone 탐지를 위한 Chirp pulse 레이다 시스템 Conference 2019년 한국전자파학회 하계종합학술대회, 2019. |
333. | Sparse Scene Recovery for High-Resolution Automobile FMCW SAR via Scaled Compressed Sensing Journal Article IEEE Transactions on Geoscience and Remote Sensing, 57 (12), pp. 10136 - 10146, 2019. |
332. | Mutual Coupling Reduction using Via Fence in Microstrip Antenna Conference Asia-Pacific Conference on Antennas and Propagation(APCAP 2019), Korea, 2019. |
331. | Millimeter-Wave Planar Electromagentic Lens Design Using Frequency-Selective Surfaces Conference Asia-Pacific Conference on Antennas and Propagation(APCAP 2019), Korea, 2019. |
330. | Ku-band Rotary Joint Conference Asia-Pacific Conference on Antennas and Propagation(APCAP 2019), Korea, 2019. |
329. | A Modified Stripmap SAR Processing for Vector Velocity Compensation Using the Cross-Correlation Estimation Method Journal Article Journal of Electromagnetic Engineering and Science, 19 (3), pp. 159-165, 2019. |
328. | Enhanced gain and miniaturisation method of stacked dielectric resonator antenna using metallic cap Journal Article IET Microwaves, Antennas & Propagation, 13 (8), pp. 1198 - 1201, 2019. |
327. | EM lens design using thin planar metasurfaces for high antenna gain and low SLL applications Journal Article IET Microwaves, Antennas & Propagation, 13 (7), pp. 950- - 958, 2019. |
326. | Contactless Linear Rotary Joint at Ku-Band Journal Article IEEE Antennas and Wireless Propagation Letters, 29 (6), pp. 373 - 375, 2019. |
325. | Lossy Ferrite Core-Dielectric Shell Structure for Miniature GHz Axial-Mode Helical Antenna Journal Article IEEE Antennas and Wireless Propagation Letters, 18 (5), pp. 951 - 955, 2019. |
324. | Fully Digital Beamforming Receiver With a Real-Time Calibration for 5G Mobile Communication Journal Article IEEE Transactions on Antennas and Propagation, 67 (6), pp. 3809 - 3819, 2019. |
323. | Ku-Band 대역 Internal Calibration System의 구현 및 성능 분석 Conference 한국전자파학회 동계종합학술대회, 2019. |
322. | 압축 센싱을 이용한 차량용 FMCW SAR 이미지 복구 방법 Conference 한국전자파학회 동계종합학술대회, 2019. |
321. | Leakage Mitigation in Heterodyne FMCW RADAR for Small Drone Detection With Stationary Point Concentration Technique Journal Article IEEE Transactions on Microwave Theory and Techniques, 67 (3), pp. 1221 - 1232, 2019. |
2018 |
|
320. | Microwave and Optical Technology Letters, 61 (3), pp. 801 - 804, 2018. |
319. | 차량탑재 형 X-band SAR를 위한 Range Doppler 알고리즘 개발 Conference 한국전자파학회 제 30차 정기총회 및 추계학술대회, 2018. |
318. | Analysis of Stacked Dielectric Resonator Antenna Conference 2018 International Symposium on Antennas and Propagation (ISAP), Korea, 2018. |